PRO-Install Dealers Nationwide

Call 09 525 8080

17 Eric Paton Way
St Johns
Auckland
New Zealand

Phone: +64 9 525 8080

Email us here

Trade and Heavy Duty Accessories


Aerial Mounting Kit

Aerial Mounting Kit

For attaching a range of accessories including aerials, lights and signage.

  • Stronger Made from 5mm Steel
  • High wear resistant
  • Anti-corrosion zinc coating
  • Open ended for easier installation

Beacon Plate

Beacon Plate

Ideal for securely attaching beacons/flashing light units to your roof racks.

  • Stronger Made from 3mm Steel
  • High wear resistant
  • Anti-corrosion zinc coating

Complete 2.6m Ladder Rails for Step Ladder

Complete 2.6m Ladder Rails for Step Ladder

This complete 2.6 metre Ladder Rails, Roller, Retaining Strap and fittings set is suitable for mounting on either 2 or 3 bars. It has been specifically designed for Step Ladders, and includes a retainer arm at the front end, to prevent vertical movement of your ladder.

Includes an extra large ladder roller at 70cm to accommodate the larger base of the Step Ladder.

Complete 3m Ladder Rails for Extension Ladder

Complete 3m Ladder Rails for Extension Ladder

This complete 3 metre Ladder Rails, Roller, Retaining Strap and fittings set is suitable for mounting on either 2 or 3 bars. It has been specifically designed for Extension Ladders, and includes a retainer arm at the front end, to prevent vertical movement of your ladder.

Eye Bolt

Eye Bolt

A convenient anchor point to secure Tie Down Straps or Ratchet Tie Down hooks. The Eye Bolt is also able to be screwed into the top of Ladder Pegs.

Heavy Duty Tie Down

Heavy Duty Tie Down

3.5 metre long tie-down with metal cam lock

Ladder Peg 180mm

Ladder Peg 180mm

These 180mm high Ladder Pegs are ideal for supporting ladders and similar loads and come with mini Tie Down Straps. Set of 4.

Ladder Peg 180mm

Ladder Peg 180mm

These 180mm high Ladder Pegs are ideal for supporting ladders and similar loads and come with mini Tie Down Straps. Set of 2.

Ladder Peg 95mm

Ladder Peg 95mm

These 95mm high Ladder Pegs are ideal for supporting ladders and similar loads and come with mini Tie Down Straps. Set of 4.

Ladder Peg 95mm

Ladder Peg 95mm

These 95mm high Ladder Pegs are ideal for supporting ladders and similar loads and come with mini Tie Down Straps. Set of 2.

Ladder Roller

Ladder Roller

The Ladder Roller utilises a specially suited aluminium centre with corresponding rubber extruded sleeve for maximum protection of your ladders and is guaranteed to always roll.

Fits ROLA Heavy Duty Racks Only

Moulded Ladder Peg

Moulded Ladder Peg

Moulded Ladder Pegs are able to be clamped around the crossbar, and have swivel legs that can turn through 360 degrees so that contoured loads can be accommodated.

Mounting Base

Mounting Base

The Mounting Base Slides into the crossbar channel and can be used for custom mounting applications. Set of 4.

Mounting Base with Hole and Stud

Mounting Base with Hole and Stud

The Mounting Base with Hole and Stud slides into the crossbar channel and can be used for custom mounting applications. Set of 4.

Pipe Clamp 100mm

Pipe Clamp 100mm

These Pipe Clamps are designed to rigidly attach 100mm tube to your racks.

Pipe Clamp 100mm

Pipe Clamp 100mm

The pipe clamps are designed to rigidly attach 100mm conduit to your racks.

Pipe Clamp 150mm

Pipe Clamp 150mm

These Pipe Clamps are designed to rigidly attach 150mm tube to your racks.

Ratchet Tie Down

Ratchet Tie Down

This Ratchet Tie Down consists of a heavy duty ratchet mechanism with 3500mm strap and metal hook.

Retainer Strap, Cam Lock and Snap-on Fitting

Retainer Strap, Cam Lock and Snap-on Fitting

This Strap, Camlock and Fitting allows fast and simple securing of any ladder to Heavy Duty cross bars by pulling the middle of the ladder down onto the bar.

Two Piece Conduit Holder and Conduit - 3.1m Conduit

Two Piece Conduit Holder and Conduit - 3.1m Conduit

This Conduit Holder is manufactured to Telstra specifications, including reinforced end caps and safety wires

T Bolt

T Bolt

Pack of 4 Tbolts allows you to custom fit your accessories to the universal channel.

Gutter Mount to Track Mount adaptor kit

Gutter Mount to Track Mount adaptor kit

Gutter Mount to Track Mount adaptor kit: 1 pair

Heavy Duty Eye Bolt

Heavy Duty Eye Bolt

A convenient anchor point, secured into the rack channel and can be used to secure Tie Down Straps or Ratchet Tie Down hooks. The Eye Bolt is also able to be screwed into the top of Ladder Pegs. 1 per bag.

Load Support Holder

Load Support Holder

Sliding in the roof rack channels these assist to support varying loads like eskies or jerry cans. The Load Support Holder with tough nylon, glass reinforced construction, built-in buffer strip to avoid marking fragile loads. Pack of two. Rola recommend the use of a heavy duty tie down strap in conjunction with this part: RCTD RRP$20.00

Hilift Jack mount

Hilift Jack mount

Lets you carry your high lift jack safely and securely. Features tool free mounting and a high wear durable finish. Designed to fit:

  • Hilift Brand: X-Treme, HL-Red, HL-484 Black
  • Maxitrack Brand: MTHLJ
  • Black Rat Brand.